This is a problem with Windows 7 and nothing else. I found quite a few "Event 2017, srv" errors, saying nonpaged-pool memory couldn't be allocated. We have got a peer-peer network with a NAS as a file store. This seemed to make the problem happen less often but didn’t stop it. Check This Out
In all your "responses", you haven't asked for any additional information.... Launch regedit from Start Search box.2. computername\username is the complete username including the computername (the ones of your serving computer), and the password, if you have any. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa 3. http://www.techrepublic.com/forums/discussions/windows-xp-pro-randomly-loses-connection-to-network/
No authentication protocol was available.Under Category is shows SPNEGO (Negotiator) and I don't know what that means.These two Warnings seem to occur every day at different times, but I'm guessing that Advanced properties on the server are set to "Enable NetBIOS over TCP/IP" (it had been "Default") The server is my workgroup's master browser. These machines are not statically assigned but have a DHCP reservation from the server assigned to that MAC address.Try this...Take one of the PCs and set the address on the NIC when I went back to either Windows 7 machine and clicked on the mapped drive, it hung and would not reconnect to the share.
I don’t know if I have SP1. So, long story short, I'm almost 100% positive its something in the OS. Regards, Miya TechNet Subscriber Support in forum. Did you try _P_K_'s suggestion?
How about because the problem concerned Poly Admin's system, and Poly Admin's system was fixed by installing SP1. Server 2012 Keeps Dropping Network Connection Sorry I didnt monitor this thread closer, had to fix other things. Seemingly if a machine is left on for about 6~8 hours (doesn't matter if it is idle or being heavily used; doesn't matter if it is logged in or not logged How about, "The problem is that your computer's doing something funny....
Privacy statement © 2017 Microsoft. in the right hand pane click the + sign beside "network adapters".right click your network card and left click properties. Put Metric on your network property/advance to 1 and reboot For us that solution finaly work Denis Tuesday, May 12, 2015 7:42 PM Reply | Quote 0 Sign in to vote It is verry annoying to recover system every week to keep network share access.
I started experiencing the same problems with this machine mapping back the my File_Machine. 4. I can't access. The others still ping and connect like nothing's going on. I did already try switching a good portion of the workstations to a new switch, to no avail. Windows 7 Loses Network Connection Intermittently Else it could be maybe the powersetting wich turns off the networkadapter. Windows 7 Loses Mapped Network Drives You have not addressed MY problem, and have given a lot of excuses for NOT being able to help.
Right click "my computer" and left click manage. his comment is here As I would like to test and see if this command works for me and if it doesn't then I would like to go back to using the default value. When the machines lose connection, ipconfig shows the IP addresses and DNS servers (i.e. - does not show 0.0.0.0, its shows the #'s its supposed to); pinging an IP locally and It's really strange why the XP machines are unaffected and only cause problems on the W7 machine. Net Config Server /autodisconnect:-1
If you choose to participate, the online survey will be presented to you when you leave the Technet Web site.Would you like to participate? I have methods to find out more but you don't want to share much. Regardless of how frustrated you get, keep things in perspective. this contact form The computer (and hence the windows XP pro install) are fairly new (subjective...10 months....
You know have the info on how to recreate the problem. What is also interesting is that the server's network loss can be cured with a reboot but when the lab XP computers did it, they needed to be Powered Down to Anyone have any ideas?
Hope this works for all. --Jim Thursday, August 08, 2013 3:03 PM Reply | Quote 0 Sign in to vote After i try every fix from all forum i found on He indicated that it happens mostly when logging on but occasionally during the day. For better or worse, today's PCs tend to need some attention such as cleaning vents and more but in this case I can't offer anything specific. I then remember to look at the properties of the Marvell Yukon Ethernet Controller card and do ADVANCED / Battery Mode Link Detection and set to “No Energy Saving”.
After several test and looking at forum after forum. I wanted to post an update and get any further ideas why this network loss happens. So I left it as one of the patches fixed things up. navigate here brokn52 has chosen the best answer to their question.
Is it theoretically possible to deploy backdoors on ports higher than 65535? Then run the same machine for that timeframe and see if the connection is lost.Your reservation is evidently set to an 8 hour lease and for some reason cannot renew the no problems there. 6. Overnight, for some reason the clients are losing connection to the server but not their actual network connection since internet is still available.
Fixed my problem instantly and permanently. The lab computers are now reattached to the domain, and aside from the server still losing connectivity they seem alright for the moment. BUT YOU HAVE TO ASK!! But the internet access is still working fine.
As mentioned above, however, machines attached to the server via a mapped network drive can still access the server. Clicking the drive didn't reconnect.I couldn't find any menuoption for"Reconnect" (Lots of "Disconnect"s though, except I was already disconnected!) I seem to have found a solution that doesn't require command prompts Connect with top rated Experts 17 Experts available now in Live! The server is running Server 2003, patched and good.
The problem is the Windows 7 is not sending the correct signal to the system housing the share to reconnect. 7. Microsoft needs to look at Windows 7 reconnection attempt commands for idle connection and see what signal is being sent to the resource to say wake up and reconnect me because
© Copyright 2017 intopt.com. All rights reserved.